لیست سفارشات لوازم ایمنی
هیچ محصولی وجود ندارد
هزینه حمل به عهده ی مشتری
ارسال
0 تومان
مجموع
استخدام کارشناس فروش تلفنی و حضوری در شرکت سلامت پیشرو ایمن سپاهان(سپاس) - کلیک کنید |
لیست سفارشات لوازم ایمنی
هیچ محصولی وجود ندارد
مشاهده عکس بزرگتر
IS0115REG10N
جدید
کلاس: یک
سایز: 8-9-10-11
رنگ: سفید
اندازه طول دستکش: 36 تا 41 سانتی متر
گروه: AZC
ضخامت: 1.5 میلیمتر
حداکثر ولتاژ کلاس صفر: 7500 ولت
ولتاژ تست شده: 10000 ولت
ولتاژ شکست: 20000 ولت
دیتاشیت فنی تخصصی دستکش عایق برق نرمال رجلتکس Regeltex
علائم و نماد های مشخص شده بر روی دستکش عایق برق نرمال رجلتکس Regeltex
Our full range of insulating gloves for live working complies with the specifications of the European standard EN 60903:2003 and the international standard IEC 60903:2002. Likewise, our production is subjected to a system for ensuring EC quality of production by means of monitoring to implement article 11b of the 89/686/EEC directive relating to Personal Protective Equipment which classifies insulating gloves for live working in category III (mortal risks).
| Class | Lengths available | Categories | Thickness in mm * | Sizes available | Colour of packaging |
|---|---|---|---|---|---|
| 00 | 28/36 cm | AZC | 0.5 | 8-9-10-11 | Beige |
| 0 | 36/41 cm | AZC | 1.0 | 8-9-10-11 | Red |
| 1 | 36/41 cm | AZC | 1.5 | 8-9-10-11 | White |
| 2 | 36/41 cm | RC | 2.3 | 8-9-10-11 | Yellow |
| 3 | 36/41 cm | RC | 2.9 | 8-9-10-11 | Green |
| 4 | 41 cm | RC | 3.6 | 9-10-11 | Orange |
*Obtaining the category authorises an additional thickness of O.6mm
Signification of category letters :
A : Acid - Z : Ozone - H : Oil - C : Very low temperatures - R : A+Z+H
| Class | Max operating voltage (volts) | Proof test voltage (volts) | Withstand voltage (volts) |
|---|---|---|---|
| 00 | 500 | 2 500 | 5 000 |
| 0 | 1 000 | 5 000 | 10 000 |
| 1 | 7 500 | 10 000 | 20 000 |
| 2 | 17 000 | 20 000 | 30 000 |
| 3 | 26 500 | 30 000 | 40 000 |
| 4 | 36 000 | 40 000 | 50 000 |
Conditioning of the gloves in an air oven at 70 ± 2 °C for 168 hours :
Resistance to low temperature :
conditioning of gloves for 1 hour at -25 ± 3°C. The tests are satisfactory if no tearing, breaking or cracking after folding is visible on the cuff and if the gloves pass the proof test voltage.
Flame retardancy test :
Application of a flame for 10 seconds at a finger tip.
The test is satisfactory if, after 55 seconds, the flame has not reached the marker located 55mm away at the other end.
Resistance to acid :
conditioning of gloves by immersion for 8 hours at 23 ± 2 °C in a sulphuric acid solution at 32° Baume
• The tensile strength and elongation at break values must be at least equal to 75% of those of non-conditioned gloves.
• The gloves must pass the proof test voltage.
Resistance to oil :
conditioning by immersion in oil (Iiquid 102) for 24 hr at 70 ± 2 °C
• The tensile strength and elongation at break values must be at least equal to 50% of those of non-conditioned gloves.
• The gloves must pass the proof test voltage.
Resistance to ozone :
conditioning of gloves in a chamber for 3 hours at 40 ± 2°C and in a 1 mg/m3 ozone concentration
• The gloves must not present any cracking
• The gloves must pass the proof test voltage.
:Resistance to very low temperatures
conditioning of gloves for 24 hours at -40 ± 3°C
The tests are satisfactory if no tearing, breaking or cracking after folding is visible on the cuff and if the gloves pass the proof test voltage.
Each pair of gloves is packaged in a different coloured opaque sachet depending on its class of protection.
The following information is given on the packaging : class, size, categories, type of cuff, length, test date, manufacture batch number and validation batch number.
